{
  "design": "Slow Bloom",
  "effective": "2026-11-01",
  "notice": "INPUTS ONLY - NOT A STRUCTURAL DESIGN. These are the weights, positions, areas and the bare code velocity pressure. Applying Kd, G, the shape factors, the load combinations and the code basis for this county's special wind region is a licensed structural engineer's job, and so is the pier, the base plate and the anchor design that follow from them.",
  "basis": {
    "x_ft": "distance along the boom from the yaw (main ring) axis; +x is outboard, -x is the counterweight end",
    "z_ft": "height above finished grade",
    "densities_lb_in3": {
      "steel": 0.284,
      "stainless316": 0.29
    }
  },
  "mass": {
    "rotating": {
      "lines": 19,
      "mass_lb": 156.53,
      "centre_of_gravity_x_ft": 0.376,
      "dead_load_moment_ftlb": 58.9
    },
    "fixed": {
      "lines": 5,
      "mass_lb": 127.76,
      "centre_of_gravity_x_ft": 0.0,
      "dead_load_moment_ftlb": 0.0
    },
    "total_lb": 284.29,
    "axial_load_on_the_main_ring_lb": 156.53
  },
  "dead_load_imbalance": {
    "moment_ftlb": 58.9,
    "sense": "positive means bloom-heavy (outboard of the pivot)",
    "counterweight_share_of_rotating_mass": 0.319
  },
  "counterweight_trim": {
    "counterweight_mass_lb": 50.0,
    "x_ft": -4.25,
    "adjustable_over_ft": 0.417,
    "moment_range_ftlb": 20.8,
    "note": "The plates slide on the 5 in stub only, so the total trim authority is mass x 5 in. Compare it with the dead-load imbalance above."
  },
  "largest_components": [
    {
      "id": "mast-pipe",
      "group": "fixed",
      "item": "Mast pipe, 4 in Sch 40, 7.5 ft",
      "mass_lb": 81.13,
      "x_ft": 0.0,
      "z_ft": 3.75,
      "moment_ftlb": 0.0,
      "source": "BOM A4"
    },
    {
      "id": "counterweight",
      "group": "rotating",
      "item": "Counterweight, 2 x 25 lb CAP cast iron plates, slid onto the stub",
      "mass_lb": 50.0,
      "x_ft": -4.25,
      "z_ft": 7.5,
      "moment_ftlb": -212.5,
      "source": "BOM D4, nominal plate mass; slides over the 5 in stub so x is -4.0 to -4.4 ft"
    },
    {
      "id": "boom-tube",
      "group": "rotating",
      "item": "Boom tube, 2-1/2 in OD x 0.120 x 12 ft",
      "mass_lb": 36.69,
      "x_ft": 2.0,
      "z_ft": 7.5,
      "moment_ftlb": 73.4,
      "source": "BOM D1 note, 3.05 lb/ft, 3.05 x 12 = 36.6 lb"
    },
    {
      "id": "base-plate",
      "group": "fixed",
      "item": "Base plate, A36, 12 x 12 x 3/4 in",
      "mass_lb": 30.67,
      "x_ft": 0.0,
      "z_ft": -0.08,
      "moment_ftlb": 0.0,
      "source": "BOM A5"
    },
    {
      "id": "bloom-rotors",
      "group": "rotating",
      "item": "Five bloom rotors complete (bowl 0.95 lb, hub 0.33 lb, two hub caps 1.18 lb, axle 0.09 lb, two bearings 0.05 lb each)",
      "mass_lb": 13.0,
      "x_ft": 4.8,
      "z_ft": 10.0,
      "moment_ftlb": 62.4,
      "source": "bowl from cap area 188 sq in x 0.01575 in x 0.29 lb/in3 = 0.86 lb, rounded to 0.95; hub from BOM E2 note 0.66 lb/12 in; hub caps from E5 discs; x is the mass-weighted mean of the five bloom positions"
    },
    {
      "id": "base-gussets",
      "group": "fixed",
      "item": "Four base gussets, 2 x 2 x 1/4 angle x 8 in",
      "mass_lb": 8.5,
      "x_ft": 0.0,
      "z_ft": 0.67,
      "moment_ftlb": 0.0,
      "source": "BOM A6 note, 3.19 lb/ft"
    },
    {
      "id": "head-fixed-plate",
      "group": "fixed",
      "item": "Fixed head adapter plate, A36, 7 x 7 x 1/2 in",
      "mass_lb": 6.96,
      "x_ft": 0.0,
      "z_ft": 7.5,
      "moment_ftlb": 0.0,
      "source": "BOM B2, one 12 x 12 blank yields both plates"
    },
    {
      "id": "head-rotating-plate",
      "group": "rotating",
      "item": "Rotating head plate, A36, 7 x 7 x 1/2 in",
      "mass_lb": 6.96,
      "x_ft": 0.0,
      "z_ft": 7.5,
      "moment_ftlb": 0.0,
      "source": "BOM B2"
    },
    {
      "id": "yoke-cheeks",
      "group": "rotating",
      "item": "Two nod yoke cheeks, A36, 8 x 6 x 1/4 in",
      "mass_lb": 6.82,
      "x_ft": 0.0,
      "z_ft": 7.2,
      "moment_ftlb": 0.0,
      "source": "BOM E5 cut list"
    },
    {
      "id": "fulcrum-cross-tubes",
      "group": "rotating",
      "item": "Four fulcrum cross-tubes, 6 in each, same tube as the boom",
      "mass_lb": 6.12,
      "x_ft": 0.0,
      "z_ft": 7.5,
      "moment_ftlb": 0.0,
      "source": "BOM D1 cut list"
    }
  ],
  "wind": {
    "speed_mph": 115.0,
    "kz": 0.85,
    "qz_psf": 28.8,
    "basis": "3-second gust, Exposure Category C, Grand County Design Criteria and adopted code (county also states that special wind regions exist in Grand County)",
    "source": "docs/references.md, section 2",
    "factors_left_to_the_engineer": [
      "Kd (wind directionality)",
      "G (gust effect factor)",
      "Cf / GCp shape factors for a 12 ft cantilever tube carrying five drag rotors",
      "altitude and air density (site is at about 7,300 ft)",
      "the possibility that the county will require a higher speed in a special wind region"
    ]
  },
  "wind_area": {
    "total_rotating_sqft": 7.273,
    "total_fixed_mast_sqft": 2.81,
    "total_sqft": 10.083,
    "area_times_x_ft3": 16.092,
    "area_times_z_ft3": 69.876,
    "effective_lever_arm_x_ft": 1.6,
    "effective_height_z_ft": 6.93,
    "elements": [
      {
        "id": "bloom-1",
        "item": "Bloom 1 rotor, frontal silhouette",
        "area_sqft": 0.263,
        "x_ft": 2.0,
        "z_ft": 11.0,
        "area_times_x_ft3": 0.526,
        "area_times_z_ft3": 2.893,
        "role": "load",
        "note": "highest and innermost bloom"
      },
      {
        "id": "bloom-2",
        "item": "Bloom 2 rotor",
        "area_sqft": 0.263,
        "x_ft": 3.417,
        "z_ft": 10.5,
        "area_times_x_ft3": 0.899,
        "area_times_z_ft3": 2.762,
        "role": "load",
        "note": ""
      },
      {
        "id": "bloom-3",
        "item": "Bloom 3 rotor",
        "area_sqft": 0.263,
        "x_ft": 4.833,
        "z_ft": 10.0,
        "area_times_x_ft3": 1.271,
        "area_times_z_ft3": 2.63,
        "role": "load",
        "note": ""
      },
      {
        "id": "bloom-4",
        "item": "Bloom 4 rotor",
        "area_sqft": 0.263,
        "x_ft": 6.167,
        "z_ft": 9.5,
        "area_times_x_ft3": 1.622,
        "area_times_z_ft3": 2.498,
        "role": "load",
        "note": ""
      },
      {
        "id": "bloom-5",
        "item": "Bloom 5 rotor",
        "area_sqft": 0.263,
        "x_ft": 7.583,
        "z_ft": 9.0,
        "area_times_x_ft3": 1.994,
        "area_times_z_ft3": 2.367,
        "role": "load",
        "note": "outermost bloom, longest lever arm"
      },
      {
        "id": "blooms-all",
        "item": "All five bloom rotors (summary line, not added again)",
        "area_sqft": 1.315,
        "x_ft": 4.8,
        "z_ft": 10.0,
        "area_times_x_ft3": 6.312,
        "area_times_z_ft3": 13.15,
        "role": "summary",
        "note": ""
      },
      {
        "id": "stalks",
        "item": "Five bloom stalks, 1-1/2 in OD, 140 in total",
        "area_sqft": 1.458,
        "x_ft": 4.65,
        "z_ft": 8.6,
        "area_times_x_ft3": 6.78,
        "area_times_z_ft3": 12.539,
        "role": "load",
        "note": "cylinder, 1.5 in dia x 11.67 ft total; centroid x is the length-weighted mean of the five stalk positions"
      },
      {
        "id": "boom",
        "item": "Boom tube, 2-1/2 in OD x 12 ft",
        "area_sqft": 2.5,
        "x_ft": 2.0,
        "z_ft": 7.5,
        "area_times_x_ft3": 5.0,
        "area_times_z_ft3": 18.75,
        "role": "load",
        "note": ""
      },
      {
        "id": "boom-end-caps-and-collars",
        "item": "End caps, collars and the counterweight",
        "area_sqft": 1.0,
        "x_ft": -2.0,
        "z_ft": 7.5,
        "area_times_x_ft3": -2.0,
        "area_times_z_ft3": 7.5,
        "role": "load",
        "note": "counterweight discs 25 lb at 1 in bore, roughly 9 in dia, plus collars; estimated"
      },
      {
        "id": "head-and-yoke",
        "item": "Head plates and nod yoke",
        "area_sqft": 1.0,
        "x_ft": 0.0,
        "z_ft": 7.4,
        "area_times_x_ft3": 0.0,
        "area_times_z_ft3": 7.4,
        "role": "load",
        "note": "a 12 in square plate stack read as 1 sq ft of projected area; estimated"
      },
      {
        "id": "mast",
        "item": "Mast, 4.50 in OD x 7.5 ft (below the ring, carried straight to the base)",
        "area_sqft": 2.81,
        "x_ft": 0.0,
        "z_ft": 3.75,
        "area_times_x_ft3": 0.0,
        "area_times_z_ft3": 10.537,
        "role": "fixed",
        "note": ""
      }
    ],
    "summary_lines_not_added": [
      {
        "id": "blooms-all",
        "item": "All five bloom rotors (summary line, not added again)",
        "area_sqft": 1.315,
        "x_ft": 4.8,
        "z_ft": 10.0,
        "area_times_x_ft3": 6.312,
        "area_times_z_ft3": 13.15,
        "role": "summary",
        "note": ""
      }
    ]
  },
  "indicative_load_only_not_a_design_load": {
    "qz_psf": 28.8,
    "bracket": [
      {
        "shape_factor": 1.0,
        "total_horizontal_force_lb": 290.0,
        "torsion_at_the_mast_axis_ftlb": 463.0,
        "overturning_moment_at_grade_ftlb": 2011.0
      },
      {
        "shape_factor": 2.0,
        "total_horizontal_force_lb": 580.0,
        "torsion_at_the_mast_axis_ftlb": 926.0,
        "overturning_moment_at_grade_ftlb": 4022.0
      }
    ],
    "warning": "qz x area x an assumed shape factor, with no Kd, no gust factor and no load combination. An order-of-magnitude prompt, not a design load."
  },
  "known_unknowns_left_to_the_engineer": [
    "soil bearing, lateral capacity and stiffness at the pier (no geotechnical data exists)",
    "the compressive strength actually achieved by the bagged concrete mix in a 12 in sonotube",
    "code basis and load combinations the county will accept (IBC/ASCE 7 edition, and any local amendment for this county's special wind region)",
    "the fatigue and dynamic-amplification question: a 12 ft cantilever with five rotating drag devices is not a static structure",
    "the anchor design: four 3/4 in Titen HD screw anchors in a 12 in pier, combined tension and shear, edge distance and spacing in a 12 in diameter concrete cylinder"
  ],
  "validation": {
    "ok": true,
    "problems": []
  }
}
