{
  "precedent": [
    {
      "name": "Alexander Calder",
      "dates": "1898-1976 (born Lawnton, Pennsylvania 1898; died New York City 1976)",
      "what_it_is": "Standing mobiles are free-standing structures: a fixed base carries an armature of rods/wire from which weighted discs and shapes hang, pivoting and rotating on air currents (the 1934 works, e.g. 'A Universe', were motor-driven; later mobiles moved by wind alone). Hanging mobiles suspend the same swinging armature from a ceiling. 'A Universe' (1934) is iron pipe, wire, wood, string and paint with a motor, 40.5 x 30 x 29 in, in the collection of MoMA, New York.",
      "url": "https://calder.org/works/standing-mobile/a-universe-1934/",
      "relevance_to_slow_bloom": "The direct ancestor of every balanced, wind-driven cantilever - a balanced stem carrying hanging, freely-pivoting elements. Slow Bloom is essentially a Calder standing mobile made literal and planted in a garden: same balance-and-suspension idea, but the suspension point is a single ground post and the arm is driven to face the wind, which is exactly where it departs from Calder.",
      "verified": true
    },
    {
      "name": "George Rickey",
      "dates": "1907-2002",
      "what_it_is": "Ground-based stainless-steel kinetic sculpture mounted on a post; blades/rods pivot and rotate in the wind on pivots/bearings. 'Two Lines up Excentric VI' (1977), stainless steel, 670.5 cm high (National Galleries of Scotland): 'The two long rods of this sculpture can pivot and move 360 degrees in the wind, although they have been carefully designed not to touch each other.'",
      "url": "https://www.nationalgalleries.org/art-and-artists/353",
      "relevance_to_slow_bloom": "Closest technical precedent: a ground-planted, post-mounted, bearing/pivot-driven steel work whose blades move in the wind. Its restraint is the contrast Slow Bloom wants to make - Rickey drives bare geometry (lines only, no colour, no plant metaphor); Slow Bloom keeps Rickey's plain-bearing engineering but restores Calder's playful, coloured, botanical form.",
      "verified": true
    },
    {
      "name": "Lyman Whitaker",
      "dates": "Living; no citable birth year found (Wikipedia, artist/gallery bios give none). Active as a sculptor for over fifty years; created his first Wind Sculpture (Double Helix Horizontal) in 1985; wind-sculpture line in production since 1987.",
      "what_it_is": "Garden-scale wind sculptures: curved copper (also stainless-steel) forms - e.g. Tulip, Double Helix, Agave - on a vertical shaft that whirl on bearings; 'All sculptures can handle winds of up to 90 MPH' and are marketed as lasting 'for generations' with little maintenance.",
      "url": "https://www.leopoldwindsculptures.com/about/",
      "relevance_to_slow_bloom": "The commercial benchmark for exactly Slow Bloom's use case - a domestic garden, a single post, whirling metal forms that must keep working outdoors. Evidence that a lawn-scale market accepts an exposed bearing and repeated spinning forms, and a warning that the bearing is the differentiator ('poorly designed imitations that don't work'). Contrast: Whitaker's forms are vertical helices on an axle, not horizontal bowl-blooms on a cantilever.",
      "verified": true
    },
    {
      "name": "Anthony Howe",
      "dates": "Born 1954, Salt Lake City, Utah",
      "what_it_is": "Wind-driven stainless-steel sculptures made of many curved blades arranged around a central axle that spin in opposing directions; 'Di-Octo II' (2017, stainless steel, 25 ft, Concordia University, Montreal): the work 'assumes a linear elegance when still, then transitions to raucous animation when the wind picks up.'",
      "url": "https://www.concordia.ca/arts/public-art/collection/anthony-howe.html",
      "relevance_to_slow_bloom": "Shows a dense radial array of many blades spinning on one axis - the nearest high-craft example of 'many blooms on one stem'. Contrast: Howe's arrays are coaxial and symmetric (spin only, no travel); Slow Bloom carries its blooms out on a cantilever arm so they both spin on their own axes and sweep through space as the stem turns.",
      "verified": true
    },
    {
      "name": "Theo Jansen",
      "dates": "Born 14 March 1948, Scheveningen, Netherlands",
      "what_it_is": "Strandbeests: large wind-propelled walking sculptures built from PVC (polyvinyl chloride) tubes and canvas sails; the sails catch the wind and drive an articulated linkage-'leg' mechanism so the structure walks on its own (project begun 1990).",
      "url": "https://collections.thejewishmuseum.org/collection/35123-strandbeest",
      "relevance_to_slow_bloom": "Proof that wind alone can drive a complex, multi-element mechanical system with no motors and no power - the same premise as Slow Bloom, taken to a walking extreme. Contrast: Strandbeest is about locomotion and self-preservation on a beach; Slow Bloom is one fixed, planted, non-ambulatory artwork that only turns to face the wind and spins its blooms.",
      "verified": true
    },
    {
      "name": "Ned Kahn",
      "dates": "Born 1959 or 1960 (Wikipedia/Smithsonian); education University of Connecticut",
      "what_it_is": "Large-scale installations that make wind visible; e.g. 'Wind Veil' (2000), a parking-garage facade covered with about 80,000 small aluminium panels, each hinged to swing freely in the wind, so the whole surface ripples with the airflow; similar 'wind arbor' facade (2011) uses ~half a million hinged elements.",
      "url": "https://dataphys.org/list/ned-kahns-wind-visualizing-facades/",
      "relevance_to_slow_bloom": "Establishes that a very large number of small, individually-moving hinged panels can survive outdoors for decades, and gives the 'many small elements responding to one wind' idea. Contrast: Kahn's elements are tiny, dense and fixed to a building so the motion reads as texture; Slow Bloom has only five large, slow blooms on one stalk, so each bloom's movement should read individually rather than as a rippling field.",
      "verified": true
    }
  ],
  "technical": [
    {
      "topic": "Savonius-type vertical-axis wind rotor - maximum power coefficient (Cp) and tip-speed ratio (TSR)",
      "fact_or_number": "Cp typically 0.15-0.25 for conventional Savonius rotors ('Savonius rotors typically exhibit lower power coefficients, ranging from 0.15 to 0.25', Springer 2025 review). Upper bound reported as 'even 30%' (Cp about 0.30) by Rogowski & Maronski (Warsaw University of Technology), who also state the rotor's tip-speed ratio 'is very close to unity' (i.e. TSR about 1, in practice roughly 0.5-1.0).",
      "url": "https://jtam.pl/pdf-102097-33658  (DOI 10.15632/jtam-pl.53.1.37)",
      "verified": true,
      "notes": "Two independent sources actually reached: Rogowski K., Maronski R., 'CFD Computation of the Savonius Rotor', J. Theoretical and Applied Mechanics 53(1):37-45, 2015 (Cp up to ~30%, TSR near unity) - https://jtam.pl/pdf-102097-33658 ; and the 2025 review 'A comprehensive review on various approaches ...', Springer - https://link.springer.com/article/10.1007/s42452-025-07627-5 (Savonius Cp 0.15-0.25). Darrieus (lift) rotors often exceed 0.35 by comparison. Net guidance: a garden Savonius drive is a low-efficiency, high-torque, slow machine (TSR ~1), which suits a slowly turning decorative stem rather than power generation."
    },
    {
      "topic": "Phyllotaxis - golden angle of 137.5 degrees around a stem",
      "fact_or_number": "In spiral (Fibonacci) phyllotaxis the divergence angle between successive leaves/florets is close to the 'golden angle' of about 137.5 degrees, equal to 360(1 - 1/phi) where phi is the golden mean; the number of visible spirals (parastichies) is usually a Fibonacci number (1, 1, 2, 3, 5, 8, 13, 21 ...).",
      "url": "https://www.science.smith.edu/phyllo/About/fibogolden.html",
      "verified": true,
      "notes": "Smith College (Clark Science Center) Phyllotaxis site. Corroborated on the same site: https://www.science.smith.edu/phyllo/About/AboutIntro.html and https://www.science.smith.edu/phyllo/OldFiles/GALLERY/phyllo.html ('the angle between the chronologically successive botanical entities ... is almost universally close to 360(1-1/T)=137.5...degrees'). Supports arranging the five blooms around the stem at the golden angle (137.5 deg) to read as natural."
    },
    {
      "topic": "Colorado / Grand County frost depth for footing design",
      "fact_or_number": "36 inches. Grand County's adopted 2021 ICC local amendments state 'FROST LINE DEPTH - 36 INCHES' and require that 'foundation walls, piers and other permanent supports of buildings and structures ... shall extend to at least 36 inches (914 mm) below finished grade'. (The county's separate online 'General Information' page states 'Minimum frost line depth: 30 inches'.)",
      "url": "https://www.co.grand.co.us/DocumentCenter/View/30412/2021-ICC-Grand-County-Local-Amendments",
      "verified": true,
      "notes": "DISCREPANCY, reported honestly: the adopted code PDF says 36 in; the county website Design Criteria page (https://www.co.grand.co.us/1114/General-Information, read via browser) says 30 in. Design to the deeper, adopted-code value (36 in) for a permanent post foundation. Also on the county page: 'Winter design temperature: -16' and 'AIR FREEZING INDEX - 3000'."
    },
    {
      "topic": "Design wind speed (ASCE 7 basic wind speed, 3-second gust) for Grand County / Kremmling, Colorado",
      "fact_or_number": "115 mph, three-second gust, Exposure category C. Grand County Design Criteria (adopted 2021 Building Codes + 2025 Colorado Wildfire Resiliency Code with Local Amendments): 'Wind speed: 115 mph for three-second gusts' and 'Exposure category: C'. The adopted code document also lists 'WIND SPEED - 115 MPH'. (ASCE 7 defines the basic wind speed as the 3-second gust at 33 ft / 10 m above ground in Exposure C.)",
      "url": "https://www.co.grand.co.us/1114/General-Information",
      "verified": true,
      "notes": "Read the county page via browser (it is JavaScript-rendered, so a plain fetch returns only navigation). Code document confirming 115 MPH reached at https://www.co.grand.co.us/DocumentCenter/View/30412/2021-ICC-Grand-County-Local-Amendments (which also notes 'SPECIAL WIND REGIONS EXIST IN GRAND COUNTY' and that a licensed Colorado design professional may be required). An earlier proposed-amendment draft listed 105 MPH (https://www.co.grand.co.us/DocumentCenter/View/29939/...); the adopted value is 115 mph."
    },
    {
      "topic": "Monthly average wind speed - Kremmling / Grand Lake area, Colorado",
      "fact_or_number": "Typical monthly average hourly wind speed is about 3.8-5.8 mph. WeatherSpark (Kremmling annual page, 'Wind Speed (mph)' by month): Jan-Apr about 5.8, May 5.1, Jun 4.6, Jul 3.9, Aug 3.8, Sep 4.4, Oct 5.0, Nov 5.5, Dec 5.7; windiest day of the year about 30 March (daily average about 5.9 mph), calmest about 29 July; predominant wind direction is from the west. Month-page narratives confirm January is essentially constant around 5.8 mph and June eases from about 4.8 to 4.3 mph.",
      "url": "https://weatherspark.com/y/3375/Average-Weather-in-Kremmling-Colorado-United-States-Year-Round",
      "verified": true,
      "notes": "WeatherSpark figures read via browser (chart values are JavaScript-rendered). Independent cross-check: Weather-Atlas Kremmling page (https://www.weather-atlas.com/en/colorado-usa/kremmling-climate) gives a different seasonal pattern - windiest month June 6.2 mph, calmest December 4.5 mph. The two sources disagree on seasonality but agree on magnitude (roughly 4-6 mph average). Kremmling is at about 7,300 ft; the nearby McElroy Airfield (Kremmling) reports higher 3-7 mph averaging-period values, and exposed sites will run higher than these 10 m shelter-average figures."
    },
    {
      "topic": "Documented outdoor, grease-free, dirt-tolerant polymer slewing-ring and plain bearings (igus)",
      "fact_or_number": "igus iglide PRT-01-DD polymer (iglide J) slewing ring is built 'for use in extremely dirty environments', is 'completely maintenance-free' and 'dry-running' (no lubrication), sealed on both faces; and in a documented solar-tracker installation iglide G300 plain bearings resist 'dust, dirt and extreme temperatures (-40 F to 266 F)' and keep working after being dropped on dusty ground, where a ball bearing 'would experience serious problems'.",
      "url": "https://www.igus.com/product/iglidur_PRT_01_AL_J_DD",
      "verified": true,
      "notes": "Two igus pages reached: the PRT-01-DD slewing-ring product page (dust/contamination sealing, maintenance-free, dry-running; listed application areas include 'Outdoor solar trackers and antennas') and the solar-tracker application note https://www.igus.com/industry/renewable-energy/applications/solar-tracker-bearings-application (dust/dirt tolerance, -40 F to 266 F, tolerance of steel-structure misalignment). What this establishes for Slow Bloom: a grease-free polymer slewing ring/plain bush removes the two failure modes flagged in the concept - no lubricant to hold grit, and a low-friction polymer surface that tolerates blowing dust and does not stiffen or crack through freeze-thaw within its rated temperature range. Both sources are vendor (igus) material, so performance claims are the manufacturer's."
    }
  ]
}