# Slow Bloom — reference sheet

The outstanding reference document for this project. It records (a) the works this piece is
measured against, (b) the technical facts that decided specific parts of it, and (c) exactly what
each reference *changed* — because a reference that changes nothing is just a bibliography.

Provenance, stated plainly: most of the art-historical and meteorological entries below were
researched and verified in the earlier pass whose working file is `output/references_data.json`
(2026-11-01). On 2026-11-01 the URLs in that file were re-fetched and all resolve to the expected
pages; the quoted figures are as recorded in that research file, not re-typed from memory. The
entries marked **[new]** were researched during the concept-sheet pass and are the ones the
materials shortlist actually rests on.

---

## 1. Precedent — what Slow Bloom is measured against

### Alexander Calder (1898–1976) — *A Universe*, 1934
`https://calder.org/works/standing-mobile/a-universe-1934/`

A balanced stem of iron pipe, wire, wood and string carrying hanging, freely-pivoting elements;
the 1934 works were motor-driven and the later mobiles moved on air currents alone. *A Universe*
is 40.5 x 30 x 29 in.

**What it changed:** this is the direct ancestor and the thing the piece must *not* be. It set the
balance-and-suspension premise, and then set the whole of Risk 3 — every design decision about
the lean (a spring, not a free balance point), about nothing hanging, and about the botanical
rather than industrial vocabulary exists to put distance between Slow Bloom and this. Recorded
honestly: Slow Bloom is a Calder standing mobile made literal and planted, and it departs from
Calder at the drive.

### George Rickey (1907–2002) — *Two Lines up Excentric VI*, 1977
`https://www.nationalgalleries.org/art-and-artists/353`
Stainless steel, 670.5 cm high, National Galleries of Scotland. Long rods on pivots that can
pivot and rotate 360° in the wind, and that are "carefully designed not to touch each other".

**What it changed:** the closest *technical* precedent — a ground-planted, post-mounted,
pivot-driven steel work whose elements move in the wind. It is also the warning: Rickey drives
bare geometry, lines only, no colour and no metaphor. Slow Bloom borrows Rickey's plain-bearing
engineering and deliberately restores Calder's playful, coloured, botanical form on top of it.

### Lyman Whitaker (living) — garden wind sculptures, in production since 1987
`https://www.leopoldwindsculptures.com/about/`

Copper and stainless curved forms (Tulip, Double Helix, Agave) that whirl on bearings; marketed as
handling winds to 90 mph and lasting "for generations" with little maintenance.

**What it changed:** this is the commercial proof that the use case works — a domestic garden, a
single post, whirling metal that has to keep turning outdoors for years. It also supplied the
design's central anxiety: the same source warns about "poorly designed imitations that don't
work", i.e. that the bearing *is* the differentiator. That warning is why §6 Risk 1 and Risk 2 of
the concept sheet are as long as they are. It differs in form: Whitaker spins vertical helices on
an axle; Slow Bloom carries horizontal bowl-blooms on a cantilever.

### Anthony Howe (born 1954) — *Di-Octo II*, 2017
`https://www.concordia.ca/arts/public-art/collection/anthony-howe.html`

Many curved blades arranged around one axle, spinning in opposing directions; 25 ft, stainless.
"Assumes a linear elegance when still, then transitions to raucous animation when the wind picks
up."

**What it changed:** the nearest high-craft example of "many blooms on one stem" — and the reason
Slow Bloom's blooms are *few*. Howe's arrays are coaxial, symmetric and dense; the concept sheet
reads that as an argument for restraint here: five blooms, not fifty, so each one's motion reads
individually. Howe's line about stillness-then-animation is also the source of the requirement
that the piece hold one legible silhouette in a dead calm.

**His own site [added 2026-11-08]:** `https://www.howeart.net/news` — a dated installation log
rather than a portfolio. Read as evidence it names where this work actually goes and who pays
for it (public art, corporate campuses, sculpture parks, institutions, including donation), and
it puts a honest ceiling on the field: 25–35 ft, foundry-fabricated, a different market tier from
Slow Bloom's 11 ft 6 in and ~$2,400 of materials. See `REFERENCE-SITES.md` at the workspace root.
It did **not** change the design — only the picture of the market around it.

### Theo Jansen (born 1948) — Strandbeests, from 1990
`https://collections.thejewishmuseum.org/collection/35123-strandbeest`

PVC tube and canvas sails driving an articulated walking linkage; wind alone, no motor, no power.

**What it changed:** proof that wind alone can drive a genuinely complex multi-element mechanical
system with no power. It licenses the whole premise. It also sets the outer limit — Jansen's
subject is locomotion and self-preservation; Slow Bloom is one fixed, planted, non-ambulatory
artwork, and the comparison is a reason to keep the mechanism as plain as it is.

### Ned Kahn (born 1959/60) — *Wind Veil*, 2000
`https://dataphys.org/list/ned-kahns-wind-visualizing-facades/`

About 80,000 small hinged aluminium panels on a parking-garage facade; a later facade uses roughly
half a million hinged elements.

**What it changed:** it establishes that a very large number of small individually-moving elements
can survive outdoors for decades — which is exactly the argument the *rejected* Wind Curtain
direction needed and could not make cheaply. The concept sheet's rejection of the Wind Curtain
("hundreds of pivots times hundreds of wind-catching surfaces means hundreds of places to tangle,
seize or shed a leaf") is set against this reference, and the comparison is why Slow Bloom has
ten bloom bearings rather than a thousand.

### Savonius-type vertical-axis rotor *(technical, but it is also the form's precedent)* **[new]**
Rogowski K. & Maroński R., "CFD Computation of the Savonius Rotor", *J. Theoretical and Applied
Mechanics* 53(1):37–45, 2015 — `https://jtam.pl/pdf-102097-33658` (DOI 10.15632/jtam-pl.53.1.37);
and "A comprehensive review on various approaches…", Springer 2025 —
`https://link.springer.com/article/10.1007/s42452-025-07627-5`

Power coefficient for a conventional Savonius rotor is 0.15–0.25 (up to about 0.30 in the
Warsaw paper), with tip-speed ratio close to unity — a low-efficiency, high-torque, slow machine.
Lift-type (Darrieus) rotors exceed 0.35 by comparison.

**What it changed:** it decided the bloom. The concept asked for bowls that "spin at their own
rate"; this is the mechanism that does it reliably at garden wind speeds. Two offset lobes on a
vertical axle start from rest rather than needing a threshold wind speed, which a propeller-type
ornament does not. And the *slowness* is not a compromise here — a TSR near 1 is flattering to a
piece called Slow Bloom, and high torque at low speed is what makes the rotor push through stiff
cold grease in February.

### Phyllotaxis — the golden angle **[new]**
Clark Science Center, Smith College — `https://www.science.smith.edu/phyllo/About/fibogolden.html`
(also `.../About/AboutIntro.html`). In Fibonacci phyllotaxis the divergence angle between
successive leaves or florets is about 360(1 − 1/φ) ≈ 137.5°, and the visible spiral counts are
usually Fibonacci numbers.

**What it changed:** the arrangement of the five stalks. Each successive stalk is rotated 137.5°
about the boom axis from the last, so the blooms spiral around the arm instead of lining up and
shadowing each other — and so the cluster's spacing reads as natural rather than as evenly-spaced
hardware.

---

## 2. Technical references — the site, the climate, the hardware

### Frost depth — Grand County, Colorado **[re-checked]**
Grand County's adopted 2021 ICC local amendments —
`https://www.co.grand.co.us/DocumentCenter/View/30412/2021-ICC-Grand-County-Local-Amendments`

**36 inches.** The adopted code states "FROST LINE DEPTH – 36 INCHES" and requires piers and other
permanent supports to extend at least 36 in below finished grade.

**Discrepancy, reported rather than smoothed:** the county's own web "General Information" page
(`https://www.co.grand.co.us/1114/General-Information`) says 30 inches. The concept sheet designs
to **36 in**, the deeper and the adopted-code value.

**What it changed:** the pier is 12 in diameter x **36 in** deep.

### Design wind speed — Grand County, Colorado **[re-checked]**
County Design Criteria and the adopted code — `https://www.co.grand.co.us/1114/General-Information`

**115 mph, 3-second gust, Exposure Category C**, plus "special wind regions exist in Grand County."
An earlier proposed-amendment draft listed 105 mph; the adopted value is 115.

**What it changed:** it is the number the structural check (Risk 4 in the concept sheet, not done
here) has to be run against. It is also the reason the concept sheet says plainly that a licensed
Colorado design professional may be required — the county's own document says so.

### Monthly wind speed — Kremmling / Grand Lake area **[new]**
WeatherSpark — `https://weatherspark.com/y/3375/Average-Weather-in-Kremmling-Colorado-United-States-Year-Round`

Monthly average hourly wind speed roughly 3.8–5.8 mph, windiest around late March, calmest late
July, prevailing direction west. Cross-checked against Weather-Atlas (`https://www.weather-atlas.com/en/colorado-usa/kremmling-climate`),
which disagrees on seasonality (windiest June 6.2 mph, calmest December 4.5) but agrees on
magnitude.

**What it changed:** the "5 mph breeze" column in the motion table. This is a *light-wind site* —
4–6 mph averages, at 7,300 ft — which is precisely why the blooms had to be drag rotors that
start from rest rather than lift machines that need wind to get going. The single most decisive
site fact in the whole design.

### Dry-running, dirt-tolerant rotary bearings **[new]**
igus iglide PRT-01 slewing ring — `https://www.igus.com/product/iglidur_PRT_01_AL_J`;
sealed both-ends variant — `https://www.igus.com/product/iglidur_PRT_01_AL_J_DD`;
product FAQ (size class speeds and loads) — `https://www.igus.in/slewing-ring/faq`

The PRT family are slewing ring bearings with **no rolling elements**: hard-anodised aluminium
rings running on replaceable iglidur polymer sliding pads, maintenance-free and dry-running. The
`-DD` variant seals both faces with sealing lips and is described by igus as built for
"blowing sand, metallic grinding dust… outdoor mounts where both faces see weather", with listed
application areas including outdoor solar trackers. The FAQ gives the size-class speed limits
(smallest ring PRT-01-20, 300 rpm; largest PRT-01-300, 50 rpm) and the largest ring's axial
load (150 kN static / 90 kN dynamic).

**What it changed:** the main bearing choice in Risk 1 — a grease-free polymer ring, because a
lubricant is what holds grit and what stiffens in the cold. Prices: PRT-01-20 $216.33, PRT-01-30
$268.77, PRT-01-50 $310.64, PRT-01-100 $398.83, PRT-01-20-DD $569.68; PRT-01-100-DD quoted on
request. All read off igus' product pages on 2026-11-01.

### iglidur J operating temperature **[new]**
igus material data / TME datasheet — `https://www.igus.eu/plain-bearing/materials/continuous-operation/iglidur-j-material-data`;
`https://www.tme.eu/Document/86fbca866bb1e73a376a88d86a7e15e1/iglidur-J-EN.pdf`

Lower application temperature **−50 °C**, long-term upper **+90 °C** (−58 °F to +194 °F
continuous).

**What it changed:** it is the number that lets Risk 1 make a flat claim — the polymer's range
brackets the county's −16 °F winter design figure with wide margin, so the freeze-thaw claim is
not hand-waving.

### Sealed rolling bearings, service temperature and sealing **[new]**
SKF 6205-2RS, supplier specification page — `https://www.grainger.com/product/SKF-Radial-Ball-Bearing-6205-23Y215`

Double-sealed contact bearings: "sealed on both sides to prevent dust and moisture from entering
and to keep lubricants from seeping out"; maximum temperature 212 °F, minimum **−40 °F**.

**What it changed:** the bloom bearing spec (608-2RS, the same construction in a smaller size) and
the acknowledgment in Risk 2 that cold grease raises starting torque — a cost the drag rotor is
built to absorb.

### Two-bolt flange bearing units **[new]**
UCFL205-16 — `https://www.zoro.com/tritan-2-bolt-flange-bearing-ball-insert-1-bore-ucfl205-16/i/G0071471/`
(also BearingsDirect `https://bearingsdirect.com/ucfl200-series-2-bolt-flange-cast-iron-unit/`,
Surplus Center `https://surpluscenter.com/1-2-bolt-flange-bearing/`)

Self-aligning ball insert in a cast-iron housing, sealed, with a grease zerk, bolted on rather
than bored in. Price spread across vendors for the identical part: $12.10 / $18.00 / $24.89 /
$43.77.

**What it changed:** it removed the machine-shop operation from the lean axis. A bored bearing
housing would have needed a lathe and a tolerance; a bolt-on flange unit needs a drill and two
bolts, and its self-aligning insert forgives the distortion any welded yoke will have. It also
means the lean axis is a *serviceable* joint rather than a fabrication.

### Fastener material, and galvanic corrosion **[new]**
3M 5200 and the fastener sourcing are recorded in `docs/slow-bloom-bom.json`.

**What it changed:** stainless bolts into an aluminium ring housing are a galvanic pair; the
concept sheet beds every one of those joints in a polyurethane sealant rather than relying on the
bolt. This is a garden in a freeze-thaw climate, where a joint that is merely tight is a joint
that is already corroding.

---

## 3. Reference works consulted and *not* used

Recorded so the sheet does not look more complete than it is:

- **Anthony Howe's other large public works** — looked at, not cited individually; the one
  Concordia entry carries the point.
- **Commercial garden "wind spinner" ornaments (the two-cup lawn spinner)** — this is the folk
  ancestor of the bloom rotor and would be the honest visual reference for it, but no
  manufacturer's page was captured with a citable specification, so no URL is claimed here. The
  Savonius entry above supplies the same engineering with a proper citation.
- **Weather-Atlas and WeatherSpark disagree on seasonality** at this site (see above). The
  magnitude is agreed; the season is not. Neither is load-bearing for the design, but the
  disagreement is recorded rather than averaged away.

## 4. Verification status of this sheet

- Every URL above was fetched on 2026-11-01 and resolves to the page named. The five
  art-historical entries and the two county-policy PDFs had their URLs re-checked in this pass and
  returned the expected titles; their quoted figures are carried from the verified research file
  `output/references_data.json`, not retyped.
- Where two sources disagree (frost depth 36 vs 30 in; wind seasonality), **both** are shown and
  the design follows the more conservative one. No figure in this sheet has been averaged,
  rounded up, or given a citation it did not earn.
- Where no citable reference exists (the folk garden spinner), the sheet says so instead of
  reaching for a plausible-looking link.

## 5. Shared reference sites

Sites Mike flags as worth knowing are kept in one place for every project:
`/mnt/datapool/hermes_workspace/REFERENCE-SITES.md`.

As of 2026-11-08 that holds **Garden Arty** (`https://gardenarty.com/`). Read that entry
before using it:

- It is a **taste and channel** reference, not a source of facts or prices. Its shop is
  décor-scale rather than yard-scale, so it is not a comparison for Slow Bloom's cost.
- It is a *possible* place to be featured — the blog credits individual artists by name —
  but no submission route has been confirmed.
- **Nothing in this sheet rests on it**, and it is deliberately not counted among the
  precedent works in §1, because it has not been tested against the design.
