# 05 — Pricing

Pricing is math, not guesswork. There's a simple formula beginners can trust.

## The formula

```
Unit Cost  = (materials + packaging + shipping per pad) ÷ (number of pads)
Retail Price = Unit Cost × Markup
```

**Markup** is how much more than cost you charge. For a small product, a common
retail markup is **2–3×** (i.e. price = 2 to 3 times your unit cost). This covers
your time, the marketplace's fee, shipping, and leaves a little profit.

### Worked example

Say a first batch of 10 sets costs $150 all-in (materials + packaging + its
shipping).

- Unit cost per set = $150 ÷ 10 = **$15**
- At a 2× markup: retail = $30/set
- At a 3× markup: retail = $45/set

Then check: **does the price feel right against similar pads?**

## Reality check — what do pads sell for?

Budget to mid-range skate pads typically sell anywhere from **~$15 to ~$40 per
set** (cheap sets under $15 are usually low-quality). If your math gives a price
way above or below that, something's off — check your unit cost, your batch
size, or whether you bought something too expensive.

- If your price is **too high** (> the competition): lower costs (bigger batch,
  cheaper materials, cheaper shipping) or pick a more premium positioning.
- If your price is **too low** (< $15): you're probably undercounting — add
  packaging and shipping in honestly.

## Don't forget to include

- Marketplace/processing fees (Etsy/Amazon take a cut, roughly 5–15% + a small fixed fee).
- Shipping **to you** (do not skip it — it's real money).
- A little for **packaging/labor** if you assemble by hand.

Use `scripts/bom.py` — it totals all costs for you and shows the price at a
chosen markup so you can't make arithmetic mistakes.

## Honest tip for a novice

Cheaping out to be "cheapest" rarely works — you'd make almost nothing and
compete with big brands. **A fair, mid-range price with a genuinely better
material** is an easier sell than being the cheapest. People pay a little more
for "doesn't stink."

## Try it

1. Enter your first-batch costs into `scripts/bom.py`.
2. Read the suggested price at 2× and 3× markup.
3. Write your planned price + the unit cost in `docs/decisions.md`.

Then go to `docs/06-next-steps.md`.
