# 02 — Manufacturing

This doc gives you the vocabulary and the options so you can talk to a factory
(or understand a supplier) without feeling lost. You're not building a factory —
you're learning enough to make smart buys.

## The material basics (plain words)

Skate pads are mostly **padding** (the soft stuff that absorbs impact) covered
in a **shell/cover** (the tough outer layer) and held by **straps**.

| Term | Plain meaning |
|---|---|
| **EVA foam** | The soft, spongy padding used in most pads. Light, cheap, cushions impact. |
| **Open-cell EVA** | Foam with tiny connected air pockets — air/moisture can pass through → **breathes**, dries faster. Great for an anti-stink pad. |
| **Closed-cell EVA** | Foam with sealed pockets — doesn't absorb water, but also less breathable. |
| **Antimicrobial treatment** | A finish (often silver or zinc-based) applied to foam/fabric that slows the bacteria which cause odor. |
| **Moisture-wicking liner** | The fabric against your skin that pulls sweat to the surface so it evaporates. |
| **Ventilation / perforation** | Small holes or channels that let heat and moisture escape. |
| **Strap / closure** | The band that holds the pad on (elastic, hook-and-loop/velcro, buckle). |

**Your anti-stink formula, in one line:**
*breatheable padding (open-cell EVA) + moisture-wicking liner + optional
antimicrobial treatment + vent channels.* You can pick a subset.

## How pads are actually made (3 levels)

You do **not** need a factory to start. Level 1 is the quickest way to a real
product:

1. **Modify off-the-shelf pads** — buy normal pads, swap in a breathable/anti-odor
   liner, add vent holes, or add an antimicrobial treatment. Lowest cost, fastest,
   and you can sell a genuinely better version today.
2. **Custom padding from a materials supplier** — buy open-cell EVA sheets and
   anti-odor liner, cut & shape them (even by hand or with basic tools), and
   assemble with straps. More control, some work.
3. **Full custom manufacturing (OEM/ODM)** — a factory makes the pad to your
   design. Highest cost, highest minimum order, but a real "your brand" product.
   For later in the journey, not day one.

> A novice should start at **Level 1** (modify existing pads) or **Level 2**
> (buy materials and assemble). Don't sign a factory contract on your first
> product.

## What to ask a supplier (copy-paste these)

When you talk to a foam/material or pad supplier, ask **these exact questions**:

1. "Is this open-cell or closed-cell EVA, and what density?" (open-cell = breathable)
2. "Can it be treated antimicrobial / anti-odor? What treatment, and is it tested?"
3. "What thicknesses/sheets/strips do you sell, and what's the minimum order?"
4. "Do you sell the moisture-wicking liner fabric too?"
5. "Can you send a sample? What does it cost including shipping?"
6. "What's the price per piece/unit at small quantities?"

(There's a `scripts/suppliers.py` helper to track their answers side by side.)

## Safety / honest claim check

Whether you choose treated foam or just breathable foam, describe it honestly:
"open-cell foam breathes and dries faster, so it resists odor buildup." Do **not**
print "kills 99% of bacteria" unless the supplier gives you test evidence. A
simple, true claim is enough to start.

## Try it

Pick your **level** (1, 2, or 3) and write it in `docs/decisions.md`. Then, if
you can, email or message **one** pad or foam supplier with the six questions
above. You don't need an answer yet — just sending it is the lesson.

Then go to `docs/03-purchasing.md`.
